Installation of sensor faucet method and pay attention

In some public places, the use of sensor taps is very common. Now there are also a lot of families will choose to install induction faucet at home, will be more fashionable, beautiful, induction faucet how to install? Why doesn’t the sensor tap produce water?
How to install induction faucet
First of all, the water valve where the induction faucet is installed is closed, and then the induction faucet is fixed on the sink.

There is a protruding battery and cover, open the battery, pay attention to the positive and negative poles, you will see the red light above will keep flashing, until the flashing stop, and then cover the battery and cover and lock.

Next, open the water valve, adjust the water valve to the state of water outlet and then test whether it can be normal water outlet. If there are no problems, it can be used normally.
Installation of sensor faucet need to pay attention
When installing the induction faucet, we must pay attention to its induction window to face down, and the distance between the basin is not less than 25 cm, otherwise it will affect the induction ability of the faucet, may lead to insensitive response.

Before installation, the water inlet valve needs to be closed to prevent leakage if the installation is not in place.

Wrap the faucet with ptfe raw material tape and then install it in a fixed position.
The induction faucet needs to be equipped with batteries, generally need to prepare 4 batteries, after installing the battery, there will be induction lights flashing.
Cause of sensor faucet failure
Sometimes we put our hands under the tap, but do not water for a long time, this is because there is a problem with the induction device, to be replaced. However, it is also possible that there is no battery, so you can simply replace the new battery and maybe solve the problem.

There is another possibility, perhaps because the bottom of the faucet is blocked by something, at this time the hand is placed below the induction, then you need to wipe the lower part of the induction faucet clean.